Design, manufacturing, and distribution of solutions for transportation.

Ventilador Mecanico Easy Aero Ingles

EASY AERO ROOF VENTILATOR

Quick, easy installation in your company vehicle

The Easy Aero roof ventilator provides healthy ventilation and removes moisture, harm- ful gases and heat from your company vehicle! The push and pull technology creates powerful air circulation. The unique thing about the Easy Aero is that it doesn’t require separate floor drainage, which not only saves a great deal of work, but also prevents serious damage to your company vehicle’s exhaust, wiring and braking system. Easy to use, install and maintain.

THE BENEFITS OF THE EASY AERO

The Easy Aero removes irritating odours, moisture and gases or vapours and creates a healthy work environment thanks to a powerful supply of fresh air. The roof ventila- tor is covered with a protective grille on the inside, which can be closed if required

  • SUSTAINABLE:  Easy Aero is sustainable to use, requires no electricity and the ceiling fan is completely recyclable.
  • EASY INSTALLATION: Easy Aero can be installed on your commercial vehicle in just three easy steps.
  • HIGH CAPACITY: The push-pull effect of the Easy Aero ceiling fan results in an output of 70 m³ per hour.
  • ROBUST MATERIAL: Made of durable and less fragile plastic because no rotating parts have been used. Shockproof, virtually silent and suitable for going through the car wash.
  • NO FLOOR DRAIN: The geometry of the Easy Aero ceiling fan eliminates the need for floor drainage, unlike traditional ceiling fan models. roof.
  • ELEGANT DESIGN: Instead of rotating parts, pushing and pulling forces have been incorporated into a single model. Fits both under roof bars and on convertibles. Adjustable ventilation force.

QUICK AND EASY INSTALLATION

Guía Instalación Easy Aero

Mark out the holes using the drilling template and create the holes in the roof using a 90 mm punch (available upon request).

Use sufficient sealant on the underside and poke the tubes through the holes with the grille on the front.

Screw the cover plate onto the inside of the roof using the screws provi- ded. The roof ventilator is installed: easy!

EASY AERO ELECTRIC ROOF FAN

Always powerful ventilation in the cargo compartment of a van, even when the vehicle is parked.

Condensation, dirty air and heat create a bleak work environment. Moisture can also affect tools and equipment. By ensuring your van’s cargo space is properly ventilated, you can prevent this misery. That is possible with the Easy Aero ceiling fan.
The unique push-pull action of the Easy Aero ensures powerful air circulation. Fresh air is supplied through one hole in the ceiling fan, and dirty air and heat are removed through another hole, eliminating the need for a duct in the floor. This saves a lot of work and prevents damage.
Ventilador Elecrrico
Especificaciones

EASY AERO ELECTRIC

The Easy Aero electric ceiling fan has an electrically driven module. The fan is not mounted on the top of the roof, but is located in a closed housing on the roof of the cargo compartment. The Easy Aero Electric replaces the locking portion that holds the basic Easy Aero ceiling fan to the ceiling.

The actual fan is firmly closed and cannot be damaged by, for example, branches from outside or load from inside. The Easy Aero Electric guarantees strong air circulation even at low speeds and when parked. This is important, for example, in mobile workplaces and during the transport of animals.

QUICK AND EASY INSTALLATION

Guía instalación EA Electrico

Atornille la pieza intermedia con los cuatro tornillos.

Inserte la rejilla de protección (rejilla) y el ventilador de la manera correcta (con la flecha apuntando hacia arriba).

Conecte el cableado. Atornille la placa de cubierta en el interior del techo usando los tornillos proporcionados.

With 70 m³ per hour, the Easy Aero has a demonstrably higher capacity than conventional ceiling fans.

RELATED PRODUCTS

EASY AERO ELECTRIC ROOF FAN

PROTECTOR DEL AFORADOR / ESPADÍN

MÓDULOS FOTOVOLTAICOS SOBRE CUBIERTAS DE VEHÍCULOS INDUSTRIALES

Our products are highly versatile as they are compatible with a wide variety of brands including Mercedes, Iveco, MAN, DAF, Scania, Renault, Volvo, Ford, BMC and Fuso.

Uso de cookies

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies
Abrir chat
¿Quieres hablar con nosotros?
Hola
¿En qué podemos ayudarte?